Dymo labelwriter 450 manual serial number#
The serial number is located on the bottom of the printer. Registering the software ensures that you will be informed of any software updates.ĭuring the registration process, you will be asked to enter the serial number for your label printer. The first time you open the application, you are asked to register the software. If the printer does not feed the labels, make sure the first label is fully inserted and then press the form-feed button. NOTE: The printer feeds the labels, stopping at the beginning of the first label. Align the left edge of the label with the left edge of the label feed slot and insert the label into the slot.(See Figure 7).Insert the label spool into the slot in the printer cover with the labels extending from underneath the roll.(See Figure 6).NOTE: The label roll must fit snugly against both sides of the label spool (with no gaps) to avoid drifting as the label feeds through the printer. Place the spool guide onto the right side of the spool and press the guide tightly against the label roll, leaving no gap between the roll and the spool.Hold the spool spindle in your left hand and place the label roll on the spindle so that the labels feed from underneath and the left edge of the label roll is flush against the side of the spool.Remove the label spool from inside the cover.Open the top cover and remove any packing material inside the label compartment.Press the form-feed button to eject the labels that protected the printer during shipment.
Dymo labelwriter 450 manual for mac os#
For Mac OS X: plug the USB cable into a USB port prior to installing the software.For Windows: plug the USB cable into a USB port ONLY when prompted during the software installation.Connect the printer to your computer as follows:.Insert the power and USB cables through the cable channel and set the printer down.Plug the USB cable into the USB port on the bottom of the printer.Plug the other end of the power cord into a power outlet.Plug the power adapter into the power connector on the bottom of the printer.Plug the power cord into the power adapter.
0 kommentar(er)
